Home / FAQ's
What is PDR?
PDR or Paintless Dent Repair is a method of removing minor dents and dings without removing any paint from the vehicle. This is done by very patiently massaging the dent out from the back of the panel using specialized tools.
What are the benefits of PDR?
The most important benefit is quality. This method is the closest you can get to the dent never happening in the first place. No grinding, bondo, fillers, or primers are needed because your original factory paint is not disturbed. There are no problems with filler or paint shrinkage months after the repair.
Cost is also a major benefit of PDR. Repairs are typically between one-quarter to one-third the cost of conventional dent repair.
Time savings is yet another advantage. Many dents can be fixed in less than 2 hours. Hail damage is typically fixed in less than a week with PDR. A body shop may take 2-3 weeks for the same type of damage.
Environmental concerns are another benefit of PDR. Since this process keeps the original factory paint on your vehicle, there is no need for the paint, chemicals, or other toxins that are used in body shops when repairing dents. PDR is 100% environmentally friendly.
Will my dents be 100% gone?
On minor dents, in most cases, yes. The deeper the dent, the more difficult it is to repair. Even on larger dents, most people are amazed at the results.
Will my dents come back?
Absolutely not. Once a dent has been removed properly with PDR, it never comes back.
Can any dent be fixed?
Not all dents can be repaired using the PDR method. The most important factors in determining if a dent can be repaired by PDR are depth and location. Dents the size of a dinner plate or larger can be fixed successfully, as long as they are not too deep. On the other hand, some dents that are as small as a dime but very deep, cannot be fixed using PDR because the metal is too stretched. Cracked paint can also be an indication that a dent is too deep.
The most common dents fixed are the size of a golf ball and under. Most (about 95%) minor dents can be repaired. About 5% of minor dents can't be fixed due to depth or location. Areas such as some quarter panel opening lips, some forward areas of heavily braced hoods, or the very edges of some panels are examples of bad locations.